Hardware products
Pilot applications open
Thin absolute encoder
Thin off-axis absolute position feedback for hollow robotic joints and compact actuators.
Send machine requirements
Reference configuration range
Specification range.
Resolution and accuracy are reference targets. Bore, ring geometry, readhead position, update rate, and calibration are finalized on the joint.
- Architecture
- Thin off-axis ring + readhead
- Resolution
- ≥19-bit single-turn target
- Installed accuracy
- ±0.1° target after calibration
- Absolute interface
- SSI or BiSS-C
- Incremental interface
- RS-422 or SPI when required
- Actuator envelope
- 110–115 mm outer-envelope reference class
- Temperature
- −20 to +70 °C reference range
- Calibration output
- Installed error map and serialized test report
Final configuration
Send these details.
- Joint bore, outer diameter, axial height, mounting, and runout
- Controller interface, update rate, latency, and cable length
- Required installed accuracy, repeatability, and thermal drift
- Magnetic and electrical environment
- Calibration fixture, reference standard, and acceptance method
Engineering enquiry
Configure for your machine.
Send the drawing, duty, interfaces, quantity, and timing.
Send enquiry